A protective shield for your drivetrain

At last, protection where its needed in the shape of a drivetrain shield. Our design means you should avoid oil on your hands when you fit the Fassa Drivetrain Cover. Made in Dorset.

At the heart of your bike’s drivetrain is the rear derailleur. It’s vital for performance but it’s also the weakest point on the bike. Even a tiny impact on the rear hanger or a knock to the jockey wheels can affect gear selection which can often mean a trip to the bike shop or a delay while you work on it on arrival. You may not notice the issue until into your ride. This can lead to frustration at best, a lost race at worst.

Our Drivetrain Shield not only provides a protective barrier to the drivetrain, it also shields it from dust and foreign object contamination. (A dirty drivetrain can reduce your performance by about 10%.) Sitting slightly proud of the drivetrain, it avoids direct contact with the chain and helps reduce the chances of getting oil on your hands when you fit it. Four removable Velcro tabs ensure that you can fit the drivetrain cover to almost any bike geometry.

If you travel a lot with your bike or store it in an area of your home that’s tight on space, consider the addition of a Drivetrain Shield to protect your bicycle… and your next ride.

Universal Drivetrain shape, fits to most road and mountain bikes
Can be attached with or without the rear wheel attached
Removable velcro strap allows adjustment for the bike you are fitting it to
Long rear strap straps around the rear wheel or rear frame triangle
Closed cell foam padding
Hardwearing outer material with waterproof membrane
Size: 74cm wide x 40cm tall
Weight: 300g (sizes and weights are approximates as all our products are handmade)

Fabric:

Hardwearing 600 denier weight polyester with water resistant PVC membrane
Performance grade closed cell foam inner rejects moisture and water
Strong V69 polyester thread stands up to hard use
Industrial strength Velcro and webbing straps
Easy fit and adjustment
Easy clean

Care:

When dry, brush down with a soft brush to remove any dirt from black outer surround
Use warm soapy water to remove stubborn marks from Silver material
Leave to air dry. Not suitable for washing machine or tumble dryer

Q: What is this product for?
A: Protecting your drivetrain.

Q: How does this work?

A: By offering a padded, protective shield around your drivetrain.

Q: How do I use this product?

A: When you have finished riding fit the drivetrain cover by first holding it you your drivetrain and hooking the front sleeve over the chainring. With a little tension pull back towards the cassette, secure the velcro tab over the frame and slip the rear strap around the rear wheel (or the frame if the rear wheel is removed) and tension. Adjust to get a taught, horizontal fit.

If you park your bike in a hallway for example, the drivetrain cover will reduce the chances of oil being transferred to passers by. Oil on suit trousers or a party dress is not ideal!

Q: What does this product protect?

A: It protects the drivetrain from knocks and contamination as well as protecting clothing from passers by

Q: What is this product made of?

A: A hard wearing, 600 Denier weight technical Polyester fabric with a waterproof PVC membrane. Providing the padding is a performance grade, closed cell foam inner that does not retain moisture.

Q: Is this product waterproof?

A: This product uses waterproof materials but seams may let in water in the wettest of conditions.

Q: How does this fit?

A: Using the straps as provided

Q: What are the measurements of this product?

A: 74cm wide x 40cm tall

Q: Where is this product made?

A: This product is made in our factory in Dorset, United Kingdom and we buy our materials from our trusted suppliers in the UK.

Q: Does this product fit on my bike? Or; does this product fit on all bikes?

A: There are two to choose from, one for a mountain bike and one for a road bike. They are universal and should fit all bikes.

Q: Are the straps adjustable?

A: Yes, the velcro straps can be removed and applied according to the shape of your frame and chainstays.

Q: Can I personalize this item?

A: This product can be personalised with choices in colour, and the addition of your name and country flag.

A: This product is not currently available with personalisation

Q: How do I clean this product?

A: When dry, use a nail brush or hand brush to remove dust, mud and marks. For more stubborn marks use a small amount of warm, soapy water to remove stains and then leave to air dry. This product is not designed for use in washing machines or tumble dryers.

Q: Is there a guarantee on this product?

A: This product comes with a 30 day return policy.

Q: How do I maintain this product?

A: This product does not require any maintenance when not in use. Ideally, leave in a dry, cool place when not in use.

Padded Drivetrain Cover

Size

Colour